Roofing, Gutters & More in Hempstead
Hempstead Roofing & Maintenance offers a complete range of roofing services in Hempstead and Granite Springs, Jamesport, Marcellus, Nichols, Port Ewen. Every job gets the same attention. Big or small.
Roof Replacement
Full roof replacement starts with a complete tear-off down to the deck. We inspect every board for rot or soft spots. In Hempstead, we find decking damage on about 30% of tear-offs. Damaged sections get replaced with CDX plywood before anything else goes on. Then we build up: ice and water shield in valleys and at eaves, synthetic underlayment across the full deck, new drip edge on every edge, starter strip, field shingles, hip and ridge caps, and ridge vent. Dumpster, permits, and cleanup included.
Get a Free Quote →
Roof Repair
Most roof leaks in Hempstead come from one of five places: pipe boots, step flashing at walls, valley flashing, damaged shingles, or failed seals around skylights. We find the actual source. Not just the drip point in your ceiling. And fix it right. Water travels along rafters and sheathing before it drips, so the leak location and the damage location are often 10 feet apart.
Get a Free Quote →
Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →
New Roof Installation
New construction means we get to do everything right from scratch. No compromises, no working around someone else's mistakes. Ice and water shield where it belongs, properly lapped underlayment, correct nailing patterns, and ventilation sized to the space. That's a roof that lasts.
Get a Free Quote →
Metal Roofing
Metal roofing works on pitches as low as 3:12 for standing seam and as low as 1:12 with specific underlayment and sealant requirements. Steep pitches look incredible in metal. We help you choose the right panel profile, material, and color for your Hempstead home.
Get a Free Quote →
Shingle Roofing
CertainTeed Landmark PRO with NailTrak technology and Max Def color blends. Dimensional color depth that mimics natural cedar. Algae-resistant with StreakFighter technology. Class A fire rating, ASTM D3462 compliant, rated to 110 mph per ASTM D3161 Class F (Landmark PRO IR rated to 130 mph). 5-Star SureStart Plus warranty when installed by CertainTeed SELECT ShingleMaster. That's us. The warranty covers 100% of material and labor costs for 20 years with declining coverage for 30 more.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in Hempstead. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →
Commercial Roofing
TPO is our most-installed commercial membrane in Hempstead. 60-mil thickness, hot-air welded seams, mechanically attached or fully adhered over polyiso insulation. The weld is stronger than the membrane. 15-20 year manufacturer warranties depending on system build-up.
Get a Free Quote →
Gutter Installation
We custom-form seamless aluminum gutters on-site from a continuous coil of .027 gauge stock. No factory seams means no seam failures. We form them to the exact length your fascia requires. One piece, one gutter, no leaks.
Get a Free Quote →
Roof Inspection
Our 27-point residential roof inspection: (1) shingle condition and granule loss, (2) nail pops, (3) lifting tabs, (4) ridge cap integrity, (5) valley flashing, (6) step flashing at walls, (7) chimney flashing and counter-flashing, (8) drip edge condition, (9) pipe boot seals, (10) plumbing and HVAC vent integrity, (11) ridge vent function, (12) soffit ventilation, (13) gutter pitch and capacity, (14) downspout drainage, (15) fascia condition, (16) soffit condition, (17) ice dam evidence, (18) moss or algae growth, (19-27) attic: decking moisture, insulation displacement, rafter condition, bathroom exhaust routing, daylight penetration, ventilation balance, mold indicators, pest intrusion, previous repair evidence. Written report with annotated photos emailed same day.
Get a Free Quote →
Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →
Skylight Installation
Skylight replacement on existing curbs: VELUX FCM curb-mount units install directly on the existing curb frame. No structural modification, no interior disruption. The FCM sits on the curb with a built-in sill pan and integrates with a new QCM flashing kit. Low-E4 laminated glass with argon fill provides R-value improvements over older skylights. Solar-powered blinds and venting available on VSS models. The 10-year No Leak Installation Warranty requires VELUX-certified installation with the complete flashing system. We're certified in Hempstead.
Get a Free Quote →